NVD · 实时热榜

The Infineon Airoc Wi-Fi driver's transmit callback airoc_mgmt_send() in drivers/wifi/infineon/airoc_wifi.c allocates a net_buf from the fixed airoc_pool for every outbound packet. When whd_network_send_ethernet_data() returns a synchronous failure, the underlying WHD library does not take ownership of the buffer, but the pre-fix driver returned -EIO without releasing it. Each failed transmit therefore permanently leaks one buffer from the pool. airoc_pool is small and fixed (AIROC_WIFI_TX_PACKET_POOL_COUNT + AIROC_WIFI_RX_PACKET_POOL_COUNT, default 20 buffers) and is shared by WHD's whd_host_buffer_get callback for both transmit and receive. Once enough send failures have leaked the pool dry, airoc_wifi_host_buffer_get() returns WHD_BUFFER_ALLOC_FAIL for all subsequent allocations, so both transmit and the WHD-driven receive path fail and Wi-Fi connectivity is lost until the device is rebooted. The leak occurs only on the transmit error path. A Wi-Fi-adjacent attacker can influence the conditions that cause synchronous send failures (for example by deauthenticating/disassociating the station while the local stack continues to attempt transmits), and ordinary transient failures over the device's lifetime accumulate toward the same state. Reliable on-demand triggering is of high complexity and the impact is availability-only, but the resulting denial of service is permanent and non-recoverable without a reboot. The fix releases the buffer with airoc_wifi_buffer_release() on the failure branch, returning it to the pool. The commit also removes a redundant k_sem_give() in airoc_mgmt_disconnect(); because data->sema_common is a binary semaphore (limit 1) the duplicate give merely saturated at 1 and had no security impact.

In strongSwan before 6.0.7, identity parsing/cloning is mishandled. Parsed EAP-Identities that result in an empty but non-NULL encoding are not correctly cloned and trigger a double-free once the duplicates are destroyed.

In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register.

Brave Popup Builder (slug: brave-popup-builder) has a broken access control issue in versions through 0.8.5. Any logged-in user - Subscriber or WooCommerce Customer is enough — can read popup content they shouldn't have access to by passing a post ID in the URL.

Joomla Extension - fabrikar.com - heredoc terminator breakout in the calc element in Fabrik < 4.7.2 - The onUpdateComment endpoint did not perform any access checks.

A vulnerability was determined in alexta69 MeTube up to 2026.06.10. The impacted element is an unknown function of the file /download/.metube/cookies.txt of the component Cookie File Handler. This manipulation causes files or directories accessible. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2026.06.20 is sufficient to resolve this issue. Patch name: ce897ee00903bf7ded406f0d7852d95dd4164add. You should upgrade the affected component.

A security vulnerability has been detected in SourceCodester Class and Exam Timetabling System 1.0. Affected by this vulnerability is an unknown functionality of the file /BSIT2.php. The manipulation of the argument course leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A flaw has been found in sambitraj Student-Management-System up to 56ba287f2e9031523ccb4244cb6e3fe530e4e5d5. This affects an unknown part of the component Management Mutation Handler. This manipulation of the argument roll_no/name/father_name/class/mobile/email/password/remark causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was determined in vas3k TaxHacker up to 0.8.2. Impacted is the function buildImapConfig of the file lib/email-sync/imap-client.ts of the component Email Sync. Executing a manipulation of the argument host/port can lead to server-side request forgery. It is possible to launch the attack remotely. The pull request to fix this issue awaits acceptance.

A security flaw has been discovered in Tenda CH22 1.0.0.1. The impacted element is the function formeditFileName of the file /goform/editFileName. The manipulation of the argument editNameMit results in command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

docker-socket-proxy fails to properly gate read endpoints in the /containers Docker API namespace when the CONTAINERS environment variable is set. Attackers can use GET requests to /containers/{id}/archive, /containers/{id}/export, /containers/{id}/logs, and /containers/{id}/top to read arbitrary files and download entire container filesystems as tar archives.

chirpmyradio CHIRP before 39178db allows eval injection via crafted CSV data. This occurs in _clean_tmode in drivers/kenwood_itm.py.

privilege escalation in StackGres operator allows a low-privilege tenant who owns a database to gain administrator privileges

justhtml through 1.9.1 (fixed in 1.10.0) is vulnerable to uncontrolled recursion leading to denial of service. During JustHTML() construction, TreeBuilder.finish() unconditionally calls _populate_selectedcontent(), which recursively traverses the DOM tree via _find_elements()/_find_element() without a depth bound. An attacker who can supply HTML for parsing can provide deeply nested elements (e.g., ~1000 nested <div> tags, roughly 11 KB) to exceed CPython's default recursion limit and trigger an unhandled RecursionError, which may abort parsing, fail requests, or terminate a worker/process depending on the host application's exception handling.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check for tg ops in dce110_set_avmute Some older DCE timing generators do not implement is_tg_enabled in their ops table. Calling it unconditionally when waiting for AV mute frames causes a NULL pointer dereference on Southern Islands dGPUs when turning the display off over HDMI. Check that tg and the required ops exist before waiting for frames. (cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5)

Joomla Extension - fabrikar.com - Unauthenticated stored XSS in Fabrik < 4.7.2 - The handling of user supplied input in the jsactions feature leads to an stored XSS vector.

Brave Popup Builder (brave-popup-builder) up to version 0.8.5 reflects UTM query parameters into popup form HTML without escaping them.

A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue.

A vulnerability was found in Comfast CF-N1-S 2.6.0.1. The affected element is the function sub_41AD7C of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone of the component Web Management. The manipulation of the argument timestr/ntp_client_enabled results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used.

A weakness has been identified in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /BSIS1.php. Executing a manipulation of the argument course can lead to cross site scripting. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in sambitraj Student-Management-System up to 56ba287f2e9031523ccb4244cb6e3fe530e4e5d5. Affected by this issue is some unknown functionality of the component Dashboard. The manipulation of the argument roll_no/teacher_name results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in SourceCodester Stock Management System 1.0. This issue affects some unknown processing of the file /php_action/getOrderReport.php. Performing a manipulation of the argument clientName/clientContact results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

A vulnerability was identified in vas3k TaxHacker up to 0.8.2. The affected element is the function envSchema.parse of the file lib/config.ts of the component JWT Secret Handler. The manipulation of the argument BETTER_AUTH_SECRET leads to hard-coded credentials. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability has been found in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /admin/edit_user_account.php of the component User Account Update. Such manipulation of the argument id/username leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

justhtml before 1.12.0 (versions <= 1.11.0) contains a mutation cross-site scripting (mXSS) vulnerability in the serialization of raw-text elements such as <style> and <script>. When a DOM tree is processed by sanitize_dom() using a custom policy that keeps these elements, text nodes inside them are serialized literally without escaping, allowing attacker-controlled text containing the matching closing tag sequence to break out of the raw-text context and inject arbitrary HTML into the serialized output. The default sanitization policy is not affected because it drops the contents of style and script.

The WebToffee WooCommerce PDF Invoices, Packing Slips, Delivery Notes & Shipping Labels plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 4.9.8 via the get_image_src_in_base64 function. This makes it possible for authenticated attackers, with subscriber-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The base64-encoded file contents are embedded into the cached invoice HTML and served directly to the attacker via the plugin's own Print/Download invoice endpoints, which require only a valid nonce and access key.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Skip sub-disable teardown for never-linked sub-schedulers A sub-scheduler enable can fail before scx_link_sched() links the sched into the hierarchy, e.g. when the parent is already being disabled, and cleanup still runs the full scx_sub_disable(). That is racy against root disable: drain_descendants() is the only ordering between a sub's disable-time task walk and root disable's all-task teardown, and an unlinked sub is invisible to it. Root's teardown can thus run between the never-linked sub's drain and its walk, exiting every task to no scheduler. The walk then trips the membership WARN and re-homes the exited tasks onto the dying hierarchy, a use-after-free. Skip the cgroup ownership reset and the task walk if @sch was never linked, indicated by the empty ->sibling as unlinking only happens later in the same function. The membership WARN remains valid: a linked sub is always waited on by an ancestor's drain.

Joomla Extension - fabrikar.com - Unauthenticated modification of any comment in Fabrik < 4.7.2 - The onUpdateComment endpoint did not perform any access checks.

The Content Mask WordPress plugin before 1.8.5.5 does not check the capability required to publish the post type being created, allowing users with a role as low as Contributor to publish posts and pages on the site without holding the publish capability.

A vulnerability has been found in SourceCodester Stock Management System 1.0. This vulnerability affects unknown code of the file /php_action/printOrder.php. Such manipulation of the argument clientName/clientContact leads to cross site scripting. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A flaw has been found in itsourcecode Hospital Management System Project in PHP 1.0. This impacts an unknown function of the file /viewservicetype.php. This manipulation of the argument delid causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used.

justhtml versions <= 1.11.0 (fixed in 1.12.0) do not sufficiently escape HTML-significant characters (angle brackets) in text nodes when converting a parsed document to Markdown via to_markdown(). While a small set of Markdown metacharacters are escaped, characters such as < and > are preserved, so untrusted input that is safe in to_html() — including entity-decoded text (e.g. &lt;script&gt;) or text from RCDATA/RAWTEXT-parsed elements like <title>, <textarea>, <noscript>, and <plaintext> — can be emitted as raw HTML in the Markdown output, enabling a sanitizer bypass and potential cross-site scripting when that output is rendered.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.8 before 19.0.6, 19.1 before 19.1.4, and 19.2 before 19.2.2 that under certain conditions could have allowed an authenticated user to achieve remote code execution due to a path traversal vulnerability in the package registry.

The WooCommerce Bookings WordPress plugin before 3.9.0 does not perform a capability check on one of its AJAX actions, and its nonce check can be bypassed by omitting the token, allowing users with Subscriber-level access and above to create draft bookable products.

The Security Hardener plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 2.4.4. The vulnerability exists because the plugin's user-enumeration protection, which is enabled by default, hooks the rest_endpoints filter via secure_user_endpoints() and overwrites every registered handler's permission_callback on both the /wp/v2/users and /wp/v2/users/(?P<id>[\d]+) routes — including POST, PUT, PATCH, and DELETE handlers — with a bare closure that returns only is_user_logged_in(), completely stripping WordPress Core's original capability checks such as create_users, promote_user, edit_users, and delete_users that WP_REST_Users_Controller normally enforces. This makes it possible for authenticated attackers with Subscriber-level access and above to create new Administrator accounts by sending POST request to /wp/v2/users with administrator role, or to reset an existing Administrator's password by issuing a PUT/POST request to /wp/v2/users/<id>. Because the block_user_enum option defaults to enabled, no special plugin configuration is required — the overwrite is active on every request as soon as the plugin is installed.

In the Linux kernel, the following vulnerability has been resolved: NFS: Pin the 'struct nfs_server' during a FREE_STATEID call Dan Aloni reports that he was able to hit a use-after-free bug if a FREE_STATEID operation gets delayed for whatever reason. Fix this by bumping the refcount of the 'struct nfs_server' object for the duration of the FREE_STATEID so it doesn't get cleaned up from underneath us while operations are still in flight.

Joomla Extension - fabrikar.com - Unauthenticated disclosure of any commenter's email address in Fabrik < 4.7.2 - The onGetEmail endpoint did not perform any access checks.

justhtml before 1.16.0 contains multiple HTML sanitization bypass issues that can allow active/dangerous content (e.g., script or style) to survive sanitization, potentially leading to cross-site scripting. The issues primarily affect advanced usage rather than the default JustHTML(..., sanitize=True) path for ordinary parsed HTML: mutating or reusing sanitization policy objects (including exported defaults) could weaken later sanitization; programmatic DOM input to sanitize()/sanitize_dom() could miss mixed-case tag names (e.g., ScRiPt, StYlE); crafted programmatic doctype names could serialize into active markup; and custom policies preserving SVG or MathML could allow animation elements, presentation attributes with external url(...) references, or DOM trees mislabeled as namespace="html" to bypass foreign-content checks. Fixed in 1.16.0.

The PPWP – Password Protect Pages plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.9.18 via deserialization of untrusted input from the 'post_protection_roles' vulnerable parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

The RestrictMate WordPress plugin before 1.3.0 does not restrict the user role supplied during account registration, allowing unauthenticated attackers to create a new administrator account and gain a logged-in administrator session, leading to full site takeover.

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock.

Joomla Extension - fabrikar.com - Missing ACL check in download element in Fabrik < 4.7.3 - ???.

justhtml versions 0.9.0 through 1.21.0 contain a cross-site scripting vulnerability in to_markdown() where inline code spans fail to account for blank lines as block boundaries. Attackers can inject blank lines into code or pre element text to break the inline span, causing sanitized HTML to be emitted unescaped and re-parsed as live Markdown by compliant renderers.

In the Linux kernel, the following vulnerability has been resolved: xfs: handle NULL b_addr in xfs_buf_free When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with bp->b_addr still NULL. The code falls through to the folio_put path which calls virt_to_folio(NULL), dereferencing an invalid address and causing a kernel crash. Call Trace: xfs_buf_free+0x25f/0x510 xfs_buf_alloc+0xc98/0x19b0 xfs_buf_find_insert+0x55/0x14d0 xfs_buf_get_map+0x122b/0x17c0 xfbtree_init_leaf_block+0x11c/0x4a0 xfbtree_init+0x1bb/0x460 xrep_rmap_setup_scan+0x100/0x1f0 xrep_rmapbt+0x41/0xc0 Fix this by skipping folio_put() when bp->b_addr is NULL.

justhtml before 3.11.0 contains a cross-site scripting vulnerability where the default sanitizer bypasses event handler removal in selectedcontent projections. Attackers can inject SVG or MathML elements with event handlers that are cloned and reinserted into output without sanitization, enabling stored or reflected XSS attacks.

Joomla Extension - fabrikar.com - Path Traversal via image element in Fabrik < 4.7.3 - ???.

justhtml before 1.17.0 contains multiple security issues in sanitization, serialization, and programmatic DOM handling. When custom policies preserve foreign namespaces (SVG/MathML), dangerous content such as HTML integration points (SVG <foreignObject>, MathML <annotation-xml encoding="text/html">) and mutation-XSS parser-differential payloads could survive sanitization and become active HTML after reparse; SVG filter="url(...)" and preserved <style> could leave resource-loading CSS (@import, background-image:url()). Programmatic script/style/Comment nodes could serialize into active markup. Additional hardening fixes address sanitize-pipeline cache mutation and DOM parent/child cycles that could cause infinite loops. Most issues affect advanced or custom configurations rather than the default JustHTML(..., sanitize=True) safe path.

In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip().

Joomla Extension - fabrikar.com - Remote code execution via image element in Fabrik < 4.7.3 - ???.

justhtml versions 1.13.0 and earlier contain a parser-differential / mutation cross-site scripting (mXSS) vulnerability when using a custom SanitizationPolicy that preserves foreign namespaces (e.g., drop_foreign_namespaces=False with allowlisted SVG/MathML elements or raw-text containers such as <style>). Specially crafted input can sanitize into markup that appears safe but becomes unsafe when re-parsed by a browser or another HTML parser, allowing markup injection. The default safe configuration (sanitize=True) is not affected. Fixed in 1.14.0.